IC200UDD164|GE Fanuc|16-Point Digital Input and 4-Point Digital Output Module
Description
The IC200UDD164 is a 16-Point Digital Input and 4-Point Digital Output Module designed for use with the VersaMax Micro PLC system. It provides 16 isolated digital inputs and 4 transistor outputs, suitable for connecting to field devices such as sensors or actuators. The module operates on a 24Vdc power supply and is ideal for applications that require both input monitoring and output control in industrial automation.
Features
-
Input Points:
- 16 isolated digital inputs
- Configurable for positive or negative logic
- Supports up to four high-speed counter (HSC) inputs
-
Output Points:
- 4 NPN transistor outputs (sink type)
- Outputs can be configured as regular outputs or controlled by HSCs
- Some outputs can function as PWM outputs
-
Power Supply:
- Operates on 24Vdc nominal voltage (range: 19.2Vdc to 30Vdc)
-
Environmental:
- Operating Temperature: -20°C to +60°C
- Storage Temperature: -40°C to +85°C
-
Communication:
- RS-232 serial port supporting SNP/SNPX, RTU slave protocols, and Serial I/O
-
Additional Features:
- Two removable terminal strips with protective covers
- Run/Stop switch that can also function as a memory protect switch or fault clear switch
- Time-of-Day Clock
- Two analog potentiometers for calibration
- Supports up to four expansion units in any combination
- Non-volatile flash memory for program storage and system firmware
- Configurable to read configuration at power-up from either RAM or flash memory
Technical Specifications
-
DC Inputs:
- Number: 16
- Rated Voltage: 24Vdc
- Input Voltage Range: 0 to 30Vdc
- Input Current: 7.5mA typical
- Input Resistance: 2.8 kΩ
- Threshold Voltage: ON at 9V minimum, OFF at 2.5V maximum
- Response Time: 0.5 to 20ms configurable, 100µs for HSC inputs
- Isolation Voltage: 1500V RMS between field side and logic side, 500V RMS between groups
-
Transistor Outputs:
- Number: 4
- Maximum Load: 0.5A per output
- Output Voltage Drop: 1.5V maximum
- OFF State Leakage: 0.1mA maximum
- Response Time: 0.1ms maximum (12Vdc, 0.2A)
- Isolation Voltage: 1500V RMS between field side and logic side, 500V RMS between groups
- External fusing is recommended to protect against load shorts
-
High-Speed Counter:
- Maximum Frequency: 10kHz
- Count Pulse Width: 20% to 80% duty cycle at 10kHz
- Count Registers: 16 bits
-
DC Power Supply:
- 24Vdc for input circuits and user devices, 200mA maximum
- +5Vdc on pin 7 of Serial Port, 100mA maximum
-
Power Consumption:
- Total Power: 1.2W at 24Vdc
-
Dimensions:
- Width: 122mm
- Height: 75mm
- Depth: 100mm
-
Weight:
- Approximate: 200g
-
Environmental Protection:
- IP20 rated for protection against solid objects greater than 12.5mm in diameter
IC200UDD164|GE Fanuc|16-Point Digital Input and 4-Point Digital Output Module
IC200UDD164|GE Fanuc|16-Point Digital Input and 4-Point Digital Output Module
Description
The IC200UDD164 is a 16-Point Digital Input and 4-Point Digital Output Module designed for use with the VersaMax Micro PLC system. It provides 16 isolated digital inputs and 4 transistor outputs, suitable for connecting to field devices such as sensors or actuators. The module operates on a 24Vdc power supply and is ideal for applications that require both input monitoring and output control in industrial automation.
Features
-
Input Points:
- 16 isolated digital inputs
- Configurable for positive or negative logic
- Supports up to four high-speed counter (HSC) inputs
-
Output Points:
- 4 NPN transistor outputs (sink type)
- Outputs can be configured as regular outputs or controlled by HSCs
- Some outputs can function as PWM outputs
-
Power Supply:
- Operates on 24Vdc nominal voltage (range: 19.2Vdc to 30Vdc)
-
Environmental:
- Operating Temperature: -20°C to +60°C
- Storage Temperature: -40°C to +85°C
-
Communication:
- RS-232 serial port supporting SNP/SNPX, RTU slave protocols, and Serial I/O
-
Additional Features:
- Two removable terminal strips with protective covers
- Run/Stop switch that can also function as a memory protect switch or fault clear switch
- Time-of-Day Clock
- Two analog potentiometers for calibration
- Supports up to four expansion units in any combination
- Non-volatile flash memory for program storage and system firmware
- Configurable to read configuration at power-up from either RAM or flash memory
Technical Specifications
-
DC Inputs:
- Number: 16
- Rated Voltage: 24Vdc
- Input Voltage Range: 0 to 30Vdc
- Input Current: 7.5mA typical
- Input Resistance: 2.8 kΩ
- Threshold Voltage: ON at 9V minimum, OFF at 2.5V maximum
- Response Time: 0.5 to 20ms configurable, 100µs for HSC inputs
- Isolation Voltage: 1500V RMS between field side and logic side, 500V RMS between groups
-
Transistor Outputs:
- Number: 4
- Maximum Load: 0.5A per output
- Output Voltage Drop: 1.5V maximum
- OFF State Leakage: 0.1mA maximum
- Response Time: 0.1ms maximum (12Vdc, 0.2A)
- Isolation Voltage: 1500V RMS between field side and logic side, 500V RMS between groups
- External fusing is recommended to protect against load shorts
-
High-Speed Counter:
- Maximum Frequency: 10kHz
- Count Pulse Width: 20% to 80% duty cycle at 10kHz
- Count Registers: 16 bits
-
DC Power Supply:
- 24Vdc for input circuits and user devices, 200mA maximum
- +5Vdc on pin 7 of Serial Port, 100mA maximum
-
Power Consumption:
- Total Power: 1.2W at 24Vdc
-
Dimensions:
- Width: 122mm
- Height: 75mm
- Depth: 100mm
-
Weight:
- Approximate: 200g
-
Environmental Protection:
- IP20 rated for protection against solid objects greater than 12.5mm in diameter
