Honeywell |SA4219-1|Wired 8 Zone Expander Module
Description:
SA4219-1 is a wired zone expander module designed to enhance the connectivity capabilities of security systems. It supports multiple zone expansions and offers flexible data input/output options.
Features:
- Multiple zone expansion support
- Flexible data input/output interfaces
- Built-in tamper switch
- Configurable as Normally Closed (NC) or End-of-Line Resistor (EOLR) monitored zones
Technical Specifications
Electrical Parameters
- Input Voltage: 12VDC (RED for positive, BLK for ground)
- Current: :93A
- Data Connections: DATA OUT to control panel, DATA IN from control panel
- EOLR Value: 2K ohms (if EOLR option selected)
Zones and Wiring
- Supports zones A through H
- Maximum loop resistance per zone: 300 ohms + EOLR
- UL Listed EOL resistors recommended
DIP Switch Settings
- Address determination using switches 2-6
- Zone A response time configuration via switch 1
- NC or EOLR zone selection via switch 7
- Case tamper switch setting (ON = disabled, OFF = enabled) via switch 8
Compliance and Certifications
- FCC Part 15 compliant
- Class B digital apparatus
- ICES-003 compliance for Canada
- Operating conditions: must not cause harmful interference and must accept any received interference
Physical Attributes
- Dimensions and weight specifications available in manual
Important Notes
- Do not make unauthorized changes or modifications to the equipment.
- Ensure proper installation to avoid radio frequency interference with TV or radio reception.
Honeywell |SA4219-1|Wired 8 Zone Expander Module

Honeywell |SA4219-1|Wired 8 Zone Expander Module
Description:
SA4219-1 is a wired zone expander module designed to enhance the connectivity capabilities of security systems. It supports multiple zone expansions and offers flexible data input/output options.
Features:
- Multiple zone expansion support
- Flexible data input/output interfaces
- Built-in tamper switch
- Configurable as Normally Closed (NC) or End-of-Line Resistor (EOLR) monitored zones
Technical Specifications
Electrical Parameters
- Input Voltage: 12VDC (RED for positive, BLK for ground)
- Current: :93A
- Data Connections: DATA OUT to control panel, DATA IN from control panel
- EOLR Value: 2K ohms (if EOLR option selected)
Zones and Wiring
- Supports zones A through H
- Maximum loop resistance per zone: 300 ohms + EOLR
- UL Listed EOL resistors recommended
DIP Switch Settings
- Address determination using switches 2-6
- Zone A response time configuration via switch 1
- NC or EOLR zone selection via switch 7
- Case tamper switch setting (ON = disabled, OFF = enabled) via switch 8
Compliance and Certifications
- FCC Part 15 compliant
- Class B digital apparatus
- ICES-003 compliance for Canada
- Operating conditions: must not cause harmful interference and must accept any received interference
Physical Attributes
- Dimensions and weight specifications available in manual
Important Notes
- Do not make unauthorized changes or modifications to the equipment.
- Ensure proper installation to avoid radio frequency interference with TV or radio reception.