DS200TCCBG1BED | General Electric | Analog I/O Board
Description
The DS200TCCBG1BED is a Common Extended Analog I/O Board manufactured by General Electric as part of the Mark V Series, used in GE Speedtronic Control Systems.
Details
- Part Number: DS200TCCBG1BED
- Manufacturer: General Electric
- Series: Mark V
- Product Type: Common Extended Analog I/O Board
- Power Requirements: +5 V dc
Connectors
- 2PL: Distributes power from the TCPS board in the core
- 3PL: Data Bus between the STCA, TCCA, and TCCB boards in the core
- JHH: Carries the 4-20 mA/0-1 mA input signals from the TBCB terminal board
- JII: Carries the RTD input signals from the TBCB terminal board
- JMP: Carries the PT and CT signals from the TCEB board in the core
- JKK: Typically not used
- JTEST: Typically not used
- TCQPL: Typically not used
Configuration
-
Hardware:
- Jumpers J1, J2, J3, J4, J5: Used for generator and bus voltage monitoring, line current monitoring in the Mark V LM
- Jumper J14: Connects the RS232 serial port to DCOM
- Jumpers J15 and J16: Used for testing purposes
-
Software:
- I/O configuration constants for RTDs, mA inputs, generator and bus voltage, and line current are entered in the I/O Configuration Editor on the HMI
DS200TCCBG1BED | General Electric | Analog I/O Board
Текущий продукт
Текущий
Продавец:
GE Fanuc
DS200TCCBG1BED | General Electric | Analog I/O Board
Обычная цена
$273.00
Цена продажи
$273.00
Обычная цена
$526.00
Параметры
Описания
Description
The DS200TCCBG1BED is a Common Extended Analog I/O Board manufactured by General Electric as part of the Mark V Series, used in GE Speedtronic Control Systems.
Details
- Part Number: DS200TCCBG1BED
- Manufacturer: General Electric
- Series: Mark V
- Product Type: Common Extended Analog I/O Board
- Power Requirements: +5 V dc
Connectors
- 2PL: Distributes power from the TCPS board in the core
- 3PL: Data Bus between the STCA, TCCA, and TCCB boards in the core
- JHH: Carries the 4-20 mA/0-1 mA input signals from the TBCB terminal board
- JII: Carries the RTD input signals from the TBCB terminal board
- JMP: Carries the PT and CT signals from the TCEB board in the core
- JKK: Typically not used
- JTEST: Typically not used
- TCQPL: Typically not used
Configuration
-
Hardware:
- Jumpers J1, J2, J3, J4, J5: Used for generator and bus voltage monitoring, line current monitoring in the Mark V LM
- Jumper J14: Connects the RS232 serial port to DCOM
- Jumpers J15 and J16: Used for testing purposes
-
Software:
- I/O configuration constants for RTDs, mA inputs, generator and bus voltage, and line current are entered in the I/O Configuration Editor on the HMI