IC200UDR005|GE Fanuc|28-Point Micro PLC module

Description

The IC200UDR005 is a 28-Point Micro PLC module designed for industrial automation, featuring 16 DC inputs, 1 DC output, and 11 relay outputs. It operates on a 120/240Vac power supply, making it suitable for a wide range of control applications. The module includes features like high-speed counters (HSC) and pulse-width modulation (PWM) outputs, providing versatile control capabilities.

Features

• Input Points:

  • 16 configurable 24Vdc inputs (positive or negative logic)
  • Supports up to four high-speed counter (HSC) inputs
  • Compatible with devices such as pushbuttons, limit switches, and proximity sensors

• Output Points:

  • 1 DC output (Q1) that can be configured as a standard, HSC, pulse train, or PWM output
  • 11 Form A (SPST) relay outputs (normally open), each rated for 2A at 240Vac or 28Vdc
  • Relay outputs can be configured as up to three HSC outputs but cannot be used as Pulse Train or PWM outputs

• Power Supply:

  • Operates on 100-265Vac (range: 100-15% to 240+10%Vac)
  • Frequency: 50-5% to 60+5% Hz
  • Inrush Current: 30A maximum at 200Vac, 40A maximum at 265Vac
  • Inrush Time: 2ms for 40Amp
  • Hold-up Time: 10ms at 85 to 100Vac, 20ms at 100 to 265Vac
  • Input Current: 0.20A typical at 200Vac, 0.10A typical at 100Vac
  • Input Power Supply Rating: 26 VA

• Environmental:

  • Operating Temperature: -20°C to +60°C
  • Storage Temperature: -40°C to +85°C

• Additional Features:

  • Provides +24Vdc output power for field devices, up to 200mA maximum
  • Removable terminal strips with protective covers
  • Run/Stop switch that can also function as a memory protect switch or fault clear switch
  • Time-of-Day Clock
  • Two analog potentiometers for calibration
  • Supports up to four expansion units in any combination
  • Non-volatile flash memory for program storage and system firmware
  • Configurable to read configuration at power-up from either RAM or flash memory

Technical Specifications

• DC Inputs:

  • Number: 16
  • Rated Voltage: 24Vdc
  • Input Voltage Range: 0 to 30Vdc
  • Input Current: 7.5mA typical
  • Input Resistance: 2.8 kΩ
  • Threshold Voltage: ON at 15V minimum, OFF at 5V maximum
  • Threshold Current: ON at 4.5mA maximum, OFF at 1.5mA minimum
  • Response Time: 0.5 to 20ms configurable, 100µs for HSC inputs
  • Isolation Voltage: 1500V RMS between field side and logic side, 500V RMS between groups

• Relay Outputs:

  • Number: 11
  • Maximum Load: 2A per circuit
  • Output Voltage Drop: 0.3V maximum
  • OFF State Leakage: 0.1mA maximum
  • Response Time: 0.1ms maximum (12Vdc, 0.2A)
  • Isolation Voltage: 1500V RMS between field side and logic side, 500V RMS between groups
  • External fusing is required to prevent damage from load shorts

• High-Speed Counter:

  • Maximum Frequency: 10kHz
  • Count Pulse Width: 20% to 80% duty cycle at 10kHz
  • Count Registers: 16 bits

• DC Output (Q1):

  • Voltage: 24Vdc
  • Maximum Current: 200mA
  • Configurable as standard, HSC, pulse train, or PWM output
  • Maximum Pulse/PWM Frequency: 5kHz

• Dimensions:

  • Width: 122mm
  • Height: 75mm
  • Depth: 100mm

• Weight:

  • Approximate: 580g (1.28 lbs)

• Environmental Protection:

  • IP20 rated for protection against solid objects greater than 12.5mm in diameter