Yokogawa | ALR121-S00 | Serial Communication Module
-
Interface:
- ALR111: RS-232C
- ALR121: RS-422/RS-485
-
Connection Method:
- ALR111: Point-to-point
- ALR121: Point-to-point (RS-422) or multipoint (RS-485)
-
Communication Function: Half-duplex
-
Synchronization Method: Start-stop synchronization
-
Transmission Speed (bps): 1200/2400/4800/9600/19200/38400 (Note: Speed depends on communication function, subsystems, and connection method.)
-
Transmission Code: ASCII/binary
-
Character Length: 7/8 bits
-
Stop Bit Length: 1/2 bits
-
Parity Check: None/even/odd
-
Lag Time After Data Transmission: 1 ms (Time to start receiving data again after transmission.)
-
Transmission Distance:
- Maximum 15 m (for RS-232C)
- Maximum 1200 m (total extended length, for RS-422/RS-485)
-
Installation Method: Mounted on ANB10, ANB11, ANR10, AFF50, AFV10, AFV30, or AFV40
-
I/O Wiring:
- Use AKB131, AKB132, AKB133, AKB134 cables or cable with 3-pair shield (AKB161 or AKB162)
- Wiring connection via D-sub-9-pin (female x 2) or clamped with terminal block’s M4 screws (5 poles x 2)
-
Current Consumption: 0.5A
-
Weight: 0.3 kg
Yokogawa | ALR121-S00 | Serial Communication Module
Yokogawa | ALR121-S00 | Serial Communication Module
-
Interface:
- ALR111: RS-232C
- ALR121: RS-422/RS-485
-
Connection Method:
- ALR111: Point-to-point
- ALR121: Point-to-point (RS-422) or multipoint (RS-485)
-
Communication Function: Half-duplex
-
Synchronization Method: Start-stop synchronization
-
Transmission Speed (bps): 1200/2400/4800/9600/19200/38400 (Note: Speed depends on communication function, subsystems, and connection method.)
-
Transmission Code: ASCII/binary
-
Character Length: 7/8 bits
-
Stop Bit Length: 1/2 bits
-
Parity Check: None/even/odd
-
Lag Time After Data Transmission: 1 ms (Time to start receiving data again after transmission.)
-
Transmission Distance:
- Maximum 15 m (for RS-232C)
- Maximum 1200 m (total extended length, for RS-422/RS-485)
-
Installation Method: Mounted on ANB10, ANB11, ANR10, AFF50, AFV10, AFV30, or AFV40
-
I/O Wiring:
- Use AKB131, AKB132, AKB133, AKB134 cables or cable with 3-pair shield (AKB161 or AKB162)
- Wiring connection via D-sub-9-pin (female x 2) or clamped with terminal block’s M4 screws (5 poles x 2)
-
Current Consumption: 0.5A
-
Weight: 0.3 kg