GE Mark VI | IS200VSVOH1BDC | Turbine Control Module
| Specification | Details |
|---|---|
| Model Number | IS200VSVOH1BDC |
| Revision | BDC |
| Manufacturer | GE Industrial Systems, General Electric Company US |
| Model Type | Servo Control Card |
| Application Specific I/O | Servo Valve Interface |
| Coil Servo Quantity | 2 or 3; 3 for TMR Applications |
| Frequency Range for Pulse Rate Inputs | 2-14 kHz |
| Functional Acronym/Abbreviation | VSVO |
| LEDs | 3 (Run, Fail, Status) |
| Prime Mover Type | Steam or Gas Turbines |
| Speed Sensor | Active or Passive |
| Sufficient Sensitivity Range | 2 Hz |
Key Features
Servo Valve Interface I/O
The IS200VSVOH1BDC interfaces with servo valve I/Os, providing selectable current drivers and feedback from LVDRs, LVDTs, and pulse-rate inputs from flow divider feedbacks.
Pulse Rate Inputs
When used with pulse rate inputs, the card operates within a frequency range of 2 to 14 kHz, ideal for flow divider feedback in servo loops. The VSVO card interfaces with both active and passive speed sensors and can support an additional two passive speed sensors when used with a Backup Protection Module.
Coil Servo Configuration
The card supports either 2 or 3 coil servos, with 3-coil configurations primarily used in TMR (Triple Modular Redundancy) applications, providing enhanced redundancy and reliability.
Servo Channels
Typically, the IS200VSVOH1BDC utilizes four servo channels, each capable of supporting up to three LVDT/LVDR feedback sensors. Feedback selection can be configured in software, offering median select, high select, or low select options. Servo current outputs on this model are bi-directional, ensuring versatile and precise control.
LVDT/LVDR Sensors
A minimum of two LVDT/LVDR sensors is recommended for TMR applications, as each sensor requires an AC excitation source.
GE Mark VI | IS200VSVOH1BDC | Turbine Control Module
GE Mark VI | IS200VSVOH1BDC | Turbine Control Module
| Specification | Details |
|---|---|
| Model Number | IS200VSVOH1BDC |
| Revision | BDC |
| Manufacturer | GE Industrial Systems, General Electric Company US |
| Model Type | Servo Control Card |
| Application Specific I/O | Servo Valve Interface |
| Coil Servo Quantity | 2 or 3; 3 for TMR Applications |
| Frequency Range for Pulse Rate Inputs | 2-14 kHz |
| Functional Acronym/Abbreviation | VSVO |
| LEDs | 3 (Run, Fail, Status) |
| Prime Mover Type | Steam or Gas Turbines |
| Speed Sensor | Active or Passive |
| Sufficient Sensitivity Range | 2 Hz |
Key Features
Servo Valve Interface I/O
The IS200VSVOH1BDC interfaces with servo valve I/Os, providing selectable current drivers and feedback from LVDRs, LVDTs, and pulse-rate inputs from flow divider feedbacks.
Pulse Rate Inputs
When used with pulse rate inputs, the card operates within a frequency range of 2 to 14 kHz, ideal for flow divider feedback in servo loops. The VSVO card interfaces with both active and passive speed sensors and can support an additional two passive speed sensors when used with a Backup Protection Module.
Coil Servo Configuration
The card supports either 2 or 3 coil servos, with 3-coil configurations primarily used in TMR (Triple Modular Redundancy) applications, providing enhanced redundancy and reliability.
Servo Channels
Typically, the IS200VSVOH1BDC utilizes four servo channels, each capable of supporting up to three LVDT/LVDR feedback sensors. Feedback selection can be configured in software, offering median select, high select, or low select options. Servo current outputs on this model are bi-directional, ensuring versatile and precise control.
LVDT/LVDR Sensors
A minimum of two LVDT/LVDR sensors is recommended for TMR applications, as each sensor requires an AC excitation source.
