3601E| Triconex |TMR Digital Output Module
Description
The 3601E is a TMR (Triple Modular Redundant) digital output module designed for high-reliability industrial control systems. It processes output signals from main processors through three channels, using quadruplicated voting circuitry to ensure a single reliable output signal to field devices. The module supports hot-swap capability and requires an external termination panel (ETP) for interfacing with the Tricon backplane.
Features
- Quadruplicated voter circuitry for reliability
- Voltage-loopback for independent switch verification
- Hot-swap capability
- External termination panel (ETP) required
- Mechanical keying for correct installation
- Load and fuse monitoring with alarms
- Continuous diagnostics with channel-specific fault indication
Technical Specifications
Nominal Voltage: 115 VAC
Type: TMR
Output Signals: 16, non-commoned
Voltage Range: 80-155 VAC
Voltage Drop: < 3V, typical
Frequency Range: 47-63 Hz
Current Ratings:
- Maximum: 2A per point
- Surge: 12A per cycle
Load Leakage: 2 mA maximum @ 60 Hz
Chassis Leakage: 4 mA maximum @ 60 Hz
Fuses (on Field Termination): 1 per output, 3A fast-acting
Point Isolation: 1500 VDC / 2500 VDC
Diagnostic Indicators:
- ON or OFF state per point
- Module Status: PASS, FAULT, ACTIVE
- Field Alarm: LOAD/FUSE per point
3601E| Triconex |TMR Digital Output Module
3601E| Triconex |TMR Digital Output Module
Description
The 3601E is a TMR (Triple Modular Redundant) digital output module designed for high-reliability industrial control systems. It processes output signals from main processors through three channels, using quadruplicated voting circuitry to ensure a single reliable output signal to field devices. The module supports hot-swap capability and requires an external termination panel (ETP) for interfacing with the Tricon backplane.
Features
- Quadruplicated voter circuitry for reliability
- Voltage-loopback for independent switch verification
- Hot-swap capability
- External termination panel (ETP) required
- Mechanical keying for correct installation
- Load and fuse monitoring with alarms
- Continuous diagnostics with channel-specific fault indication
Technical Specifications
Nominal Voltage: 115 VAC
Type: TMR
Output Signals: 16, non-commoned
Voltage Range: 80-155 VAC
Voltage Drop: < 3V, typical
Frequency Range: 47-63 Hz
Current Ratings:
- Maximum: 2A per point
- Surge: 12A per cycle
Load Leakage: 2 mA maximum @ 60 Hz
Chassis Leakage: 4 mA maximum @ 60 Hz
Fuses (on Field Termination): 1 per output, 3A fast-acting
Point Isolation: 1500 VDC / 2500 VDC
Diagnostic Indicators:
- ON or OFF state per point
- Module Status: PASS, FAULT, ACTIVE
- Field Alarm: LOAD/FUSE per point