Epro | PR6423/10R-111 | Non-Contact Eddy Current Transducer
Overview
The Epro PR6423/10R-111 is a non-contact Eddy Current Transducer designed for precise measurement of static and dynamic shaft displacement in industrial applications.
Technical Specifications
-
Measuring Range：
Static: ±1.0 mm (0.04 in)
Dynamic: 0 to 500 μm (0 to 20 mil)
Best suited for: 50 to 500 μm (2 to 20 mil) -
Sensitivity：8 V/mm
-
Target Material：Electrically conducting steel
Cylindrical shaft -
Target Surface Considerations：
On measuring collars, if the target surface is less than 25 mm (0.98 in) in diameter, error may be ≥ 1%.
Error is negligible when the target surface is greater than 25 mm (0.98 in) in diameter. -
Peripheral Speed of Shaft：0 to 2500 m/s
-
Shaft Diameter：> 25 mm (0.98 in)
-
Nominal Gap：1.5 mm (0.06 in) at the center of measuring range
-
Measuring Error After Calibration：< ±1% linearity error
-
Temperature Error：Zero Point: 200 mV / 100˚ K
Sensitivity: < 2% / 100˚ K -
Long Term Drift：0.3% max.
-
Influence of Supply Voltage：< 20 mV/V
-
Operating Temperature Range：-35 to +180˚ C (-31 to 356˚ F)
Short-term: Up to 5 hours at +200˚ C (+392˚ F) -
Storage Temperature Range：-40 to +70˚ C (-40˚ to 158˚ F)
-
Thread of Sensor：M10x1 or 3/8” – 24 – UNF – 2A
-
Sensor Material：Stainless steel
-
Pressure Limit：Equal for sensor and cable: 2 bar
-
Vibration and Shock Nominal Values at 25˚ C (77˚ F)：5 g at 60 Hz
-
Maximum Cable Temperature：+200˚ C (+392˚ F)
-
Connection of Transducer to Converters：
CON 011 and CON 021: Lemo plug
CON 041: Blunt cut cable for screw terminals -
Cable Protection：Severe and high-performance insulation, PTFE
Physical Specifications
-
Sleeve Thread：3/8” – 24 – UNF – 2A
-
Armored Cable：Without
-
Adapter Plug at 1 m (3.28 ft)：Without
-
Total Cable Length：5 m (16.4 ft)
-
Cable End：Blunt cut cable end for converter
Epro | PR6423/10R-111 | Non-Contact Eddy Current Transducer
Epro | PR6423/10R-111 | Non-Contact Eddy Current Transducer
Overview
The Epro PR6423/10R-111 is a non-contact Eddy Current Transducer designed for precise measurement of static and dynamic shaft displacement in industrial applications.
Technical Specifications
-
Measuring Range：
Static: ±1.0 mm (0.04 in)
Dynamic: 0 to 500 μm (0 to 20 mil)
Best suited for: 50 to 500 μm (2 to 20 mil) -
Sensitivity：8 V/mm
-
Target Material：Electrically conducting steel
Cylindrical shaft -
Target Surface Considerations：
On measuring collars, if the target surface is less than 25 mm (0.98 in) in diameter, error may be ≥ 1%.
Error is negligible when the target surface is greater than 25 mm (0.98 in) in diameter. -
Peripheral Speed of Shaft：0 to 2500 m/s
-
Shaft Diameter：> 25 mm (0.98 in)
-
Nominal Gap：1.5 mm (0.06 in) at the center of measuring range
-
Measuring Error After Calibration：< ±1% linearity error
-
Temperature Error：Zero Point: 200 mV / 100˚ K
Sensitivity: < 2% / 100˚ K -
Long Term Drift：0.3% max.
-
Influence of Supply Voltage：< 20 mV/V
-
Operating Temperature Range：-35 to +180˚ C (-31 to 356˚ F)
Short-term: Up to 5 hours at +200˚ C (+392˚ F) -
Storage Temperature Range：-40 to +70˚ C (-40˚ to 158˚ F)
-
Thread of Sensor：M10x1 or 3/8” – 24 – UNF – 2A
-
Sensor Material：Stainless steel
-
Pressure Limit：Equal for sensor and cable: 2 bar
-
Vibration and Shock Nominal Values at 25˚ C (77˚ F)：5 g at 60 Hz
-
Maximum Cable Temperature：+200˚ C (+392˚ F)
-
Connection of Transducer to Converters：
CON 011 and CON 021: Lemo plug
CON 041: Blunt cut cable for screw terminals -
Cable Protection：Severe and high-performance insulation, PTFE
Physical Specifications
-
Sleeve Thread：3/8” – 24 – UNF – 2A
-
Armored Cable：Without
-
Adapter Plug at 1 m (3.28 ft)：Without
-
Total Cable Length：5 m (16.4 ft)
-
Cable End：Blunt cut cable end for converter
