Bently Nevada | 991-06-70-01-CN | Vibration Transmitter
Description
-
Model: 991-06-70-01-CN
Vibration Transmitter by Bently Nevada
General Information
- Full-scale Option: 0.6-0.6 mm
- System Length Option: 7.0 meters (23.0 feet)
- Mounting Option: 35 mm DIN-rail clips
- Agency Approval: Country-specific approvals
Specifications
- Input: 1 non-contacting 3300 NSv Proximity Probe
- Power: +12 to +35 Vdc input
- Signal Output: 4 to 20 mA in 2-wire configuration
- Accuracy: ±1.5% over full scale (typical)
- Maximum Loop Resistance: 1,000 Ω at 35 Vdc
- Current Limiting: 23 mA (typical)
- Zero & Span: Non-interacting external adjustments
Signal Characteristics
- Not OK/Signal Defeat: Output < 3.6 mA within 100 µs, restored within 0.1 seconds
- Proximitor Sensor Output: Compatible with ungrounded portable test equipment
- Output Impedance: 10 kΩ, calibrated for 10 MΩ load
- Linear Range: 0.25 to 1.65 mm (10 to 65 mils)
- Incremental Scale Factor: 7.87 mV/µm (200 mV/mil) ±6.5% (typical)
- Temperature Stability: ±10% from 0°C to +70°C (+32°F to +158°F)
Environmental Conditions
- Minimum Target Size: 9.5 mm (0.375 in) diameter
- Leadwire Length: Max 3 meters (10 feet) for Prox Out
- Hazardous Area Locations: Zone 2 or Div 2 non-hazardous, up to 13 km (8 miles) for signal output
Bently Nevada | 991-06-70-01-CN | Vibration Transmitter
Текущий продукт
Текущий
Продавец:
BENTLY NEVADA
Bently Nevada | 991-06-70-01-CN | Vibration Transmitter
Обычная цена
$225.00
Цена продажи
$225.00
Обычная цена
$476.00
Параметры
Описания
Description
-
Model: 991-06-70-01-CN
Vibration Transmitter by Bently Nevada
General Information
- Full-scale Option: 0.6-0.6 mm
- System Length Option: 7.0 meters (23.0 feet)
- Mounting Option: 35 mm DIN-rail clips
- Agency Approval: Country-specific approvals
Specifications
- Input: 1 non-contacting 3300 NSv Proximity Probe
- Power: +12 to +35 Vdc input
- Signal Output: 4 to 20 mA in 2-wire configuration
- Accuracy: ±1.5% over full scale (typical)
- Maximum Loop Resistance: 1,000 Ω at 35 Vdc
- Current Limiting: 23 mA (typical)
- Zero & Span: Non-interacting external adjustments
Signal Characteristics
- Not OK/Signal Defeat: Output < 3.6 mA within 100 µs, restored within 0.1 seconds
- Proximitor Sensor Output: Compatible with ungrounded portable test equipment
- Output Impedance: 10 kΩ, calibrated for 10 MΩ load
- Linear Range: 0.25 to 1.65 mm (10 to 65 mils)
- Incremental Scale Factor: 7.87 mV/µm (200 mV/mil) ±6.5% (typical)
- Temperature Stability: ±10% from 0°C to +70°C (+32°F to +158°F)
Environmental Conditions
- Minimum Target Size: 9.5 mm (0.375 in) diameter
- Leadwire Length: Max 3 meters (10 feet) for Prox Out
- Hazardous Area Locations: Zone 2 or Div 2 non-hazardous, up to 13 km (8 miles) for signal output