IS220PCLAH1A | GE Fanuc | Core Analog I/O Module
Description
- Model: IS220PCLAH1A
- Manufacturer: General Electric
- Product Type: Core Analog I/O Module
- Series: Mark VIe
Specifications
- Number of Channels: 4
- A/D Converter Resolution: 16-bit
- Power Supply Input Voltage: 28 V DC
- Power Consumption: 19.8 W max
- Operating Temperature: -30 to 65°C (-22 to 149°F)
Compatibility
- Mark VIe I/O Packs & Controllers: Seamlessly integrates with other Mark VIe I/O modules and controllers.
- Frame Rates: 10, 20, 40, 80, 160, and 320 ms.
- Networking & Redundancy: Supports dual controller TMR I/O and simplex I/O configurations.
Installation
- Mount using the four corner holes for firm installation.
- Use connectors J3 and J4 on the terminal board for direct PCLA connection.
- Mechanical securing of the pack through two-side mounting holes.
- For configurations, connect the SCLS and SCLT boards via a 68-pin cable.
Installation Tips
- Ensure cable grounding is adequate by fully seating cable mounting screws.
- Verify Ethernet connections, either single or dual, depending on setup.
- Confirm proper grounding of SCLS/SCLT shield wire terminals.
IS220PCLAH1A | GE Fanuc | Core Analog I/O Module
Produto atual
Atual
Fornecedor:
GE Fanuc
IS220PCLAH1A | GE Fanuc | Core Analog I/O Module
Preço regular
$233.00
Preço de venda
$233.00
Preço regular
$552.00
Opções
Descrições
Description
- Model: IS220PCLAH1A
- Manufacturer: General Electric
- Product Type: Core Analog I/O Module
- Series: Mark VIe
Specifications
- Number of Channels: 4
- A/D Converter Resolution: 16-bit
- Power Supply Input Voltage: 28 V DC
- Power Consumption: 19.8 W max
- Operating Temperature: -30 to 65°C (-22 to 149°F)
Compatibility
- Mark VIe I/O Packs & Controllers: Seamlessly integrates with other Mark VIe I/O modules and controllers.
- Frame Rates: 10, 20, 40, 80, 160, and 320 ms.
- Networking & Redundancy: Supports dual controller TMR I/O and simplex I/O configurations.
Installation
- Mount using the four corner holes for firm installation.
- Use connectors J3 and J4 on the terminal board for direct PCLA connection.
- Mechanical securing of the pack through two-side mounting holes.
- For configurations, connect the SCLS and SCLT boards via a 68-pin cable.
Installation Tips
- Ensure cable grounding is adequate by fully seating cable mounting screws.
- Verify Ethernet connections, either single or dual, depending on setup.
- Confirm proper grounding of SCLS/SCLT shield wire terminals.