PR6423/010-000 | Epro | Non-Contact Eddy Current Transducer
Overview
The Epro PR6423/010-000 is a non-contact Eddy Current Transducer designed for accurate measurement of static and dynamic shaft displacement. It is ideal for monitoring shaft eccentricity, vibration, and displacement in industrial machinery, adhering to international standards such as DIN 45670, ISO 10817-1, and API 670. The sensor is rated for explosive areas with Eex ib IIC T6/T4.
Technical Specifications
-
Measuring Range：Static: ±1.0 mm (0.04 in)
Dynamic: 0 to 500 μm (0 to 20 mil)
Best suited for: 50 to 500 μm (2 to 20 mil) -
Sensitivity：8 V/mm
-
Target Material：Electrically conducting steel
Cylindrical shaft -
Target Surface Considerations：
On measuring collars, if the target surface is less than 25 mm (0.98 in) in diameter, error may be ≥ 1%.
Error is negligible when the target surface is greater than 25 mm (0.98 in) in diameter. -
Peripheral Speed of Shaft：0 to 2500 m/s
-
Shaft Diameter：> 25 mm (0.98 in)
-
Nominal Gap：1.5 mm (0.06 in) at the center of measuring range
-
Measuring Error After Calibration：< ±1% linearity error
-
Temperature Error：Zero Point: 200 mV / 100˚ K
Sensitivity: < 2% / 100˚ K -
Long Term Drift：0.3% max.
-
Influence of Supply Voltage：< 20 mV/V
-
Operating Temperature Range：-35 to +180˚ C (-31 to 356˚ F)
Short-term: Up to 5 hours at +200˚ C (+392˚ F) -
Storage Temperature Range：-40 to +70˚ C (-40˚ to 158˚ F)
-
Thread of Sensor：M10x1 or 3/8” – 24 – UNF – 2A
-
Sensor Material：Stainless steel
-
Pressure Limit：Equal for sensor and cable: 2 bar
-
Vibration and Shock Nominal Values at 25˚ C (77˚ F)：5 g at 60 Hz
Physical Specifications
-
Sleeve Thread：M10 x 1
-
Armored Cable：With
-
Sleeve Length (+9.0 mm / 0.35 in = Total Length)：25 mm (0.98 in)
-
Adapter Plug at 1 m (3.28 ft)：With
-
Total Cable Length：4 m (13.12 ft)
-
Cable End：Lemo connector for converter
PR6423/010-000 | Epro | Non-Contact Eddy Current Transducer
PR6423/010-000 | Epro | Non-Contact Eddy Current Transducer
Overview
The Epro PR6423/010-000 is a non-contact Eddy Current Transducer designed for accurate measurement of static and dynamic shaft displacement. It is ideal for monitoring shaft eccentricity, vibration, and displacement in industrial machinery, adhering to international standards such as DIN 45670, ISO 10817-1, and API 670. The sensor is rated for explosive areas with Eex ib IIC T6/T4.
Technical Specifications
-
Measuring Range：Static: ±1.0 mm (0.04 in)
Dynamic: 0 to 500 μm (0 to 20 mil)
Best suited for: 50 to 500 μm (2 to 20 mil) -
Sensitivity：8 V/mm
-
Target Material：Electrically conducting steel
Cylindrical shaft -
Target Surface Considerations：
On measuring collars, if the target surface is less than 25 mm (0.98 in) in diameter, error may be ≥ 1%.
Error is negligible when the target surface is greater than 25 mm (0.98 in) in diameter. -
Peripheral Speed of Shaft：0 to 2500 m/s
-
Shaft Diameter：> 25 mm (0.98 in)
-
Nominal Gap：1.5 mm (0.06 in) at the center of measuring range
-
Measuring Error After Calibration：< ±1% linearity error
-
Temperature Error：Zero Point: 200 mV / 100˚ K
Sensitivity: < 2% / 100˚ K -
Long Term Drift：0.3% max.
-
Influence of Supply Voltage：< 20 mV/V
-
Operating Temperature Range：-35 to +180˚ C (-31 to 356˚ F)
Short-term: Up to 5 hours at +200˚ C (+392˚ F) -
Storage Temperature Range：-40 to +70˚ C (-40˚ to 158˚ F)
-
Thread of Sensor：M10x1 or 3/8” – 24 – UNF – 2A
-
Sensor Material：Stainless steel
-
Pressure Limit：Equal for sensor and cable: 2 bar
-
Vibration and Shock Nominal Values at 25˚ C (77˚ F)：5 g at 60 Hz
Physical Specifications
-
Sleeve Thread：M10 x 1
-
Armored Cable：With
-
Sleeve Length (+9.0 mm / 0.35 in = Total Length)：25 mm (0.98 in)
-
Adapter Plug at 1 m (3.28 ft)：With
-
Total Cable Length：4 m (13.12 ft)
-
Cable End：Lemo connector for converter
