3636T| Triconex |Relay Output Module
Description
The 3636T Relay Output (RO) module is a non-triplicated device designed for use on non-critical points that are not compatible with high-side solid-state output switches, such as interfacing with annunciator panels. It receives output signals from the main processors on three channels, which are then voted to drive 32 individual relays. The module supports hot-swap capability and requires an external termination panel (ETP) with a cable interface to the Tricon backplane.
Features
- Drives 32 non-commoned relays
- Three-channel voting for data integrity
- Loopback circuit for independent relay switch verification
- Continuous diagnostics with fault indication
- Hot-swap capability for continuous operation
- Normally open (NO) contacts
- External termination panel (ETP) required
Technical Specifications
Model Number: 3636T
Type: Non-triplicated
Points: 32, non-commoned
Voltage Range: 155 VAC/VDC, maximum
Current Load: 2A, maximum
Switching Power (Resistive): 2000 VA, 150 watts maximum
Point Isolation: 1500 VDC / 2500 VDC
Fuses: 1 per output, 2.5A fast-acting
Diagnostic Indicators:
- Output Status: 1 per point
- Module Status: PASS, FAULT, ACTIVE
3636T| Triconex |Relay Output Module
3636T| Triconex |Relay Output Module
Description
The 3636T Relay Output (RO) module is a non-triplicated device designed for use on non-critical points that are not compatible with high-side solid-state output switches, such as interfacing with annunciator panels. It receives output signals from the main processors on three channels, which are then voted to drive 32 individual relays. The module supports hot-swap capability and requires an external termination panel (ETP) with a cable interface to the Tricon backplane.
Features
- Drives 32 non-commoned relays
- Three-channel voting for data integrity
- Loopback circuit for independent relay switch verification
- Continuous diagnostics with fault indication
- Hot-swap capability for continuous operation
- Normally open (NO) contacts
- External termination panel (ETP) required
Technical Specifications
Model Number: 3636T
Type: Non-triplicated
Points: 32, non-commoned
Voltage Range: 155 VAC/VDC, maximum
Current Load: 2A, maximum
Switching Power (Resistive): 2000 VA, 150 watts maximum
Point Isolation: 1500 VDC / 2500 VDC
Fuses: 1 per output, 2.5A fast-acting
Diagnostic Indicators:
- Output Status: 1 per point
- Module Status: PASS, FAULT, ACTIVE
%20module%20is%20a%20non-triplicated%20device%20designed%20for%20use%20on...){kind=link}